ARITA BIOPURE® PEP+
ADVANCED 11-Stage WATER PURIFIER
ADVANCED 11-Stage WATER PURIFIER
Alkaline Water You Can Test
Advanced RO, UV and UF purification with copper, alkaline and mineral-conditioning media.
pH & ORP testing drops included for an indicative at-home demonstration.
12 L
Storage
Storage
Up To
16 L/Hour
16 L/Hour
Input TDS Up To
3000 mg/L*
3000 mg/L*
pH & ORP DROPS
INCLUDED
INCLUDED
₹21,990
MRP ₹24,999 • Inclusive of all taxes
Check delivery and installation availability by Pincode
*Suitability depends on source-water analysis, inlet pressure, hardness and recommended pre-treatment. Purification capacity may vary with input-water quality, pressure, temperature and membrane condition. Testing drops provide indicative colour responses and are not a substitute for laboratory water analysis.
BUILT FOR REAL-WORLD WATER CONDITIONS
Source Water Is Not Always the Same.
Borewell, tanker, municipal and mixed-source water can differ in dissolved solids, sediment, odour and chlorine.
DissolvedSolids
Sediment
Odour &Chlorine
Source-WaterVariation
WHAT SETS THE 11-STAGE SERIES APART
More Than RO Alone
11-STAGESYSTEMCarefully arranged
treatment and
conditioning
COPPERCONDITIONINGDedicated copper-
conditioning media
ALKALINE & MINERALCONDITIONINGSeparate conditioning
media in one
combined cartridge
TEST ITYOURSELFpH & ORP testing
drops included
INSIDE PEP+
Eleven Carefully Arranged Stages
015-MICRON
SPUN PRE-FILTER
SPUN PRE-FILTER
02ANTI-SCALE
MEDIA
MEDIA
03SUB-5-MICRON
FINE SEDIMENT FILTER
FINE SEDIMENT FILTER
04CARBON BLOCK
FILTER
FILTER
05RO MEMBRANE
06COPPER-
CONDITIONING MEDIA
CONDITIONING MEDIA
07ALKALINE-
CONDITIONING MEDIA
CONDITIONING MEDIA
08MINERAL-ENRICHMENT
MEDIA
MEDIA
09UV TREATMENT
10UF MEMBRANE
11ALKALINE-MEDIA
FLOW CONTROL
FLOW CONTROL
iStages 6–8 are separate media housed in one combined conditioning cartridge. Stage 11 controls flow through the alkaline media; it is not a TDS controller.
Proof You Can See
Don’t Just Take Our
Word for It. Test It Yourself.
Every PEP+ includes pH and ORP testing drops for an indicative at-home colour demonstration.
1
Collect
Treated Water
CollectTreated Water
2
Add The
Correct Drops
Add TheCorrect Drops
3
Observe The
Colour Response
Observe TheColour Response
Results vary with input-water quality, flow setting, cartridge condition and usage. The included drops provide indicative colour responses and are not a substitute for laboratory water analysis.
Real Product. Real Installations.
Customer Installation
Customer InstallationSupport Beyond The Purchase
Installation & Service
Available in eligible locations; coverage and charges may vary.
Phone & WhatsApp
10:00 AM–7:00 PM IST
Maintenance Guidance
Support for filter and conditioning-media replacement.
PEP+ At A Glance
12 L
STORAGE
STORAGE
UP TO
16 L/Hour
16 L/Hour
pH & ORP
DROPS INCLUDED
DROPS INCLUDED
WALL-MOUNTED
VIRGIN-PLASTIC BODY
VIRGIN-PLASTIC BODY
Tech Specifications
Stages of Purification
Physical Specifications
| Particular | Specification |
|---|---|
| Weight | 8.5 kg |
| Dimensions (W × D × H) | 362 × 302 × 515 mm |
| Storage Capacity | 9 L |
| Included In The Box | Plumbing kit, Primary filter kit, product, and Assembly kit. |
Technical Specifications
| Particular | Specification |
|---|---|
| Applicable TDS Range | 1 - 3000 mg/l |
| Water Flow Rate | 300 ml/min |
| Input Water Pressure | 0.3 to 3 kg/cm² |
| Input Water Temperature | 10 - 40°C |
| Input Water Chlorine (Max) | 0.2 mg/L max |
| Input Water Iron | 0.3 mg/L max |
| Input Water Turbidity (Max) | 5 NTU |
Power Specifications
| Particular | Specification |
|---|---|
| Power | 35 Watts |
| Input Voltage | Input 230 V AC / Internal AC-DC Adaptor, 24 V DC, 1.5 Amps |